What Is Required to Install Solid Decorative Perform Panel Bathroom and Shower Wall Panels?
Installing Solid Decorative Perform Panel bathroom and shower wall panels is an efficient and rewarding process that enhances the look and functionality of your bathroom. With the proper tools, materials, and preparation, you can achieve a seamless, professional finish that will stand the test of time. Here’s everything you need to know for a successful installation.
Tools and Materials Required
Perform Panel Wall Panels
Ensure you have the correct size and design for your space. Perform Panels are available in lengths of 2400mm, with widths of 598mm, 900mm, or 1200mm, and a solid 11mm thickness.
Measuring Tools
- Tape measure: This is used for accurate measurements of the walls and panels.
- Spirit level: To ensure panels are installed straight and aligned.
- Pencil: This is for marking panel cuts and placement.
Cutting Tools
- Fine-toothed saw or jigsaw: For trimming panels to fit specific wall dimensions.
- Utility knife: For precision cuts and finishing edges.
Adhesive and Sealants
- Panel adhesive: Use a strong adhesive suitable for wall panels to bond the panels securely to the wall.
- Silicone sealant: This is used to create watertight seals between panel joints, corners, and edges.
Cladding Trims
- Choose trims for edges, internal and external corners, or transitions. Trims help ensure a neat, polished look and secure installation.
Screws and Fixings
- Optional for additional support in high-impact areas, particularly in wet rooms or commercial settings.
Cleaning Supplies
- Microfiber cloth: This is used to clean panels before and after installation.
- Mild detergent: To ensure the panels are grease-free before applying adhesive.
Protective Gear
- Safety goggles and gloves: For safe handling of tools and materials.
Preparation Steps
Measure and Plan
- Measure the dimensions of your bathroom or shower area.
- Plan the panel layout to minimize cuts and ensure a clean finish.
Surface Preparation
- Ensure walls are clean, dry, and free of grease, dust, or loose paint.
- Remove existing tiles or uneven surfaces if necessary.
Cut Panels to Size
- Use a jigsaw or fine-toothed saw to cut panels to fit around fixtures, windows, or outlets.
Install Cladding Trims
- Attach the appropriate trims to edges and corners before installing the panels. Trims help secure panels and improve the aesthetic finish.
Installation Steps
Apply Adhesive
- Spread a bead of adhesive evenly on the back of the panel. Use a zig-zag pattern to ensure proper adhesion.
Fit the Panels
- Press the panel firmly onto the wall, starting from the corner or edge. Use a spirit level to ensure alignment.
- Slide the panel into the trim or groove, ensuring a snug fit.
Seal Joints with Silicone
- Apply silicone sealant between joints, edges, and trims for a watertight seal. Smooth the silicone with a finishing tool for a neat appearance.
Repeat the Process
- Continue installing subsequent panels, ensuring they align properly and fit securely into the tongue-and-groove joints.
Finishing Touches
- Wipe down the panels to remove any adhesive residue or fingerprints.
- Check all edges and joints for a seamless finish.
Optional Add-Ons
- Backlighting: Install LED strips behind panels for a modern, luxurious touch.
- Accessories: Add towel rails, shelves, or hooks for enhanced functionality.
Why Choose Solid Decorative Perform Panels?
- Durability: Solid 11mm panels withstand daily wear and tear, ensuring long-lasting performance.
- Waterproof and Hygienic: Ideal for wet areas, preventing water ingress and mould growth.
- Low Maintenance: Grout-free and easy to clean with just a damp cloth.
- Versatile Designs: Available in various finishes like marble, stone, and contemporary patterns.
By following these steps and using the required tools and materials, you can achieve a seamless, professional finish with Solid Decorative Perform Panel wall panels. Ready to upgrade your bathroom or shower area? Explore our range of Perform Panels at www.performboard.co.uk to find the perfect design for your project!